SimonsVoss Transponders


TRANSPONDER 3064

    The transponder is used as the means of identification in the System 3060, in order to activate digital locks and Smart Relays. Typical communication distances are up to 12 inches (30 cm) to the lock and up to 47.24 inches (120 cm) to the Smart Relay.

PRODUCT VERSIONS:

  • Standard transponder in a robust casing with midnight-blue button
  • Version identical to the standard transponder but with a dark-red button
  • Other options provide bonded casings and/or sequential numbering
  • Version with consecutive numbering for the whole order according to customer request, up to six alphanumeric digits (minimum order quantity: 100 units)
  • Transponder for use with validation terminal (please note: separate firmware)
  • Transponder with an additional passive chip for integrating external systems.
  • Transponder approved for explosion protection zone 1, certification: intrinsic safety ib, zone 1, group IIC, T3, II2G
  • Password transponder for storing the lock system password
  • Switching transponder with two connection wires enabling activation by an external system

TECHNICAL SPECIFICATIONS:
  • Designer casing made from black plastic (polyamide)
  • Diameter: 1.65 inches (42 mm), thickness: 0.54 inches (13.7 mm)
  • Degree of protection: IP 65, with bonded casing IP 66
  • Environment category III
  • Integrated lithium button cell type CR 2032
  • Battery life: up to 1 million activations or up to seven years on standby
  • Validity can be set (activated/deactivated) up to six months in advance
  • Can store data sets for three independent locking systems



BIOMETRIC READER Q3008



    The world’s first completely wireless, network-compatible biometric wall reader. Extremely flat and modern design.


TECHNICAL SPECIFICATIONS:
  • Biometric reader with integrated fingerprint sensor
  • Administering up to 50 users
  • Battery: 1x AA 3.6 VDC Lithium
  • Battery lifespan: up to 70,000 activations or up to 7 years standby
  • Master finger function
  • Dimensions: 3.78 x 3.77 x 0.85 inches (96 x 95.7 x 21.5 mm) (H x W x L)
  • Weight: 0.8 oz (115 g)
  • Atmel strip sensor
  • Range: up to 12 inches (30 cm) to a lock, up to 47.24 inches (120 cm) to a Smart Relay
  • Degree of protection: IP41
  • Temperature range: 41°F to +122°F (+5 °C to +50 °C)





PINCODE KEYPAD 3068

    The battery operated PinCode keypad is integrated into the System 3060 without wires, and opens any component by radio when the correct 4 to 8-digit code is entered. With its transparent ring, this ultra-flat, flush-mounted keypad goes with any setting. The keypad is mounted near the door – inside, outside, and even on glass surfaces. The PinCode keypad has a dual-stage battery warning system, which announces the need to change the battery in plenty of time to prevent being locked out. To protect against misuse, an acoustic alarm sounds for one minute if an incorrect PinCode is entered five times. The keypad can be set in a special VdS shunt lock mode, enabling it to be used for the simple arming and disarming of an alarm system.


TECHNICAL SPECIFICATIONS:
  • Winner of the IF-Product-Design-Award 2006
  • No wires, flush-mounted
  • Dimensions: 3.78 x 3.77 x 0.55 inches (96 x 95.7 x 14 mm) (H x W x L)
  • Battery: 2x CR2032 3V Lithium
  • Battery lifespan: up to 100,000 activations or up to seven years standby
  • Dual-stage battery warning system
  • Manipulation alarm
  • Range: up to 12 inches (30 cm) to a lock, up to 47.24 inches (120 cm) to a Smart Relay
  • Degree of protection: IP 65
  • Temperature range: -4°F to +122°F (–20 °C to +50 °C)





SMARTCLIP 3069

    The Smartclip 3069 is a cardholder with an integrated SimonsVoss transponder. The cardholder 
can accommodate plastic cards in the ISO 7816 format, enabling them to be worn visibly.

TECHNICAL SPECIFICATIONS:
  • Casing made from transparent plastic with a ‘metallized’ plastic clasp
  • Winner of the IF-Product-Design-Award 2006
  • Dimensions: 3.85 x 2.6 x 0.71 inches (97.9 x 66 x 18 mm) (W x H x L)
  • Weight: 1.16 oz (33 g) incl. battery
  • Removals of card: up to 50,000
  • Range: approx. 12 inches (30 cm) to a lock, up to 47.24 inches (120 cm) to a Smart Relay
  • Battery: 1 x CR2032 3V lithium
  • Battery lifespan: approx. one million activation's or approx. seven years standby
  • Operating temperature range: 32°F to +140°F (0 °C to +60 °C)
  • Degree of protection: IP 52
  • Storage temperature range: -22°F to +185°F (–30 °C to +85 °C)